
-
Edge Position Control Systems
(Sensors)- Design Position Control DPC
- LINE FOLLOWER HEAD LH500
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH19
- PHOTOHEAD PH30 / PH31
- CMOS Linear Sensor SLH30
- Ultrasonic Autowide Sensor
UHW500 / 700 - Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW051
- ULTRASONIC SENSOR UH01 series
- PHOTOHEAD PH22
- PHOTOHEAD PH16B / PH21
-
Edge Position Control Systems
(Electric type)- Motor-Driven Actuator K50 K50/A
- Compact Guide Roll Mechanism LCD series
- Guide Roll Mechanism
- Motor-Driven Actuator A352
- Motor-Driven Actuator A151
- Motor-Driven Actuator A031
- Motor-Driven Actuator K80
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K12 series
- Liteguide Amplifier AE61 series
- Litegude Amplifier AE120series
- Liteguide Controller AE1000
- Liteguide Controller AE500
-
Edge Position Control Systems
(Hydraulic type) -
Tension Control Systems
- Other related equipment
- Electro-Pneumatic Converter EN40
- MC Tension Sensor
- MG Tension Sensor
- MB Tension Sensor
- CJ Tension Sensor
- MJ Tension Sensor
- TSA Tension Sensor
- Open loop Tension Control System TCD050
- Open loop Tension Control System TCD030
- Tension Meter TM310T
- Tension Meter TM340
- Tension Controller TC680A/D
- Tension Controller TC920V
-
Automaic Register Control Systems
-
Print-to-cut Register Control Systems
-
Other Related Equipment

2951-4 Ishikawa-machi, Hachioji-shi, Tokyo 192-8522, Japan
[TEL]+81-42-642-3111
[FAX]+81-42-644-5815
[Business Overview]
Process control
Web control
Inspection systems
Tension Control Systems
Overview
Easy tension settings that can be used immediately
Operation status can be known in real timedue to additional communication function
Tension meter TM310T is a compatible with Nireco's entire line-up of tension sensors (MB, MG, MC, CD, MJ, CJ, TSA, Intrinsically safe TSA) and displays their tension readings.
The display range is from 0 to 10 kN (1,000 x 10 N). The tension signal output (0 to 10 V (0 to 5 V), or 4 to 20 mA) can be output to a sequencer, indicator, recorder or other device.
The Tension Meter TM310T quantitatively measures the tension of a running web in manufacturing and processing lines of webs such as film, textile and rubber.
Nireco tension sensors that have good accuracy and responsiveness are used. These sensors electronically measure the tiny changes that vary in proportion to the web tension. The TM310T tension meter then adds and amplifies the sensor signals and indicates the tension.
Feature
- Enhanced operability through digital processing
When initializing, various parameters can be set via a dialogue system. - Auto-zero control function
Zeroing the sensor can be done at the touch of a button. - Correction functions
Auto-zero, auto-span and other adjustment functions can easily be made. - Communications function
The TM310T's communication function (RS-485) enables connection to a PC to allow remote monitoring.
Specifications
Power source voltage | TM310T‐DC : DC24V TM310T‐AC : AC100 : 240V 50/60Hz |
---|---|
Power consumption | 25VA |
Ambient temperature operating range | 0 to +50℃ |
Ambient humidity | 80% or less (no condensation) |
Sensor power supply | +6V、±15V |
Input | 2 inputs: Any Nireco sensor from the MB, MG, MC, CD, T0, MJ , CJ , TSA series |
Output | Voltage output: 4 outputs: for control, for recording (No. 1, No. 2, Total) Current outputs: 2 outputs.. for control (4 to 20 mA) and for an indicator (1 mA) |
Warning output | 2 tension upper limits or left and right tension comparisons, lower limit warning outputs |
Telecommunications function | RS485 (2 line half duplex, 9600 bps independent protocol) |
Installation | Attached to the DIN rail |
External dimensions | (W)110×(H)90×(D)70.5 |
Mass | 1.2kg |