
-
Edge Position Control Systems
(Sensors)- Design Position Control DPC
- LINE FOLLOWER HEAD LH500
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH19
- PHOTOHEAD PH30 / PH31
- CMOS Linear Sensor SLH30
- Ultrasonic Autowide Sensor
UHW500 / 700 - Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW051
- ULTRASONIC SENSOR UH01 series
- PHOTOHEAD PH22
- PHOTOHEAD PH16B / PH21
-
Edge Position Control Systems
(Electric type)- Motor-Driven Actuator K50 K50/A
- Compact Guide Roll Mechanism LCD series
- Guide Roll Mechanism
- Motor-Driven Actuator A352
- Motor-Driven Actuator A151
- Motor-Driven Actuator A031
- Motor-Driven Actuator K80
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K12 series
- Liteguide Amplifier AE61 series
- Litegude Amplifier AE120series
- Liteguide Controller AE1000
- Liteguide Controller AE500
-
Edge Position Control Systems
(Hydraulic type) -
Tension Control Systems
- Other related equipment
- Electro-Pneumatic Converter EN40
- MC Tension Sensor
- MG Tension Sensor
- MB Tension Sensor
- CJ Tension Sensor
- MJ Tension Sensor
- TSA Tension Sensor
- Open loop Tension Control System TCD050
- Open loop Tension Control System TCD030
- Tension Meter TM310T
- Tension Meter TM340
- Tension Controller TC680A/D
- Tension Controller TC920V
-
Automaic Register Control Systems
-
Print-to-cut Register Control Systems
-
Other Related Equipment

2951-4 Ishikawa-machi, Hachioji-shi, Tokyo 192-8522, Japan
[TEL]+81-42-642-3111
[FAX]+81-42-644-5815
[Business Overview]
Process control
Web control
Inspection systems
Edge Position Control Systems(Hydraulic type)
ELECTLIC-PNEUMATIC TYPE
Overview
The Servoguide MK-IV is a new type of hydraulic controller which embodies our long experience and technology in the field of web control.
The Servoguide MK-IV.M is an electro-hydraulic EPC device. This is the most precise and responsive control method currently available. We also offer a full range of sensors for all applications and reliability needs, and hydraulic servo valves for all loads and operating speeds. Besides EPC, these components can be used in systems for LFC(Line Follow Control) and CPC(Center Position Control) and various servo mechanisms.
M121-AM
Single standard
The Model M121-AM receives a signal from the web guide amplifier and converts it into a hydraulic control signal. One Servoguide MK-IV M-series controller is mounted in the hydraulic pump unit. The model is equipped with an AUTO / MAN selecting function, which enables the controller to be swiched from automatic to manual operation, and the reel stand to be moved right and left manually.
M220-AM
Twin standard
Two Servoguide MK-IV M series controllers are mounted on one hydraulic pump unit in the M220 model, for economic and compact instrumentation when more than one EPC system such as a laminator line or a multi-stage guide roll is installed nearby.
M721-AM
High-load controller
The Model M721-AM is a high-powered Servoguide for high loads and high speed lines.
M550-AM
High pressure / High resolution-type controller
The Servoguide Unit Model M550-AM is a controller suitable for use with high-pressure, high-precision lines, using general-purpose industrial servo valves developed by Nireco as its control elements.
M810-AM
High-load controller
The Model M810-AM controller incorporates our industrial servo values (Powerguide), giving it greater power output and responsiveness than other models.
Feature
- Compact and highly reliable.
- Large operating force and high sensitivity and accuracy (control within±0.l mm according to installation conditions)
- A variety of sensors are available according to the application.
- The sensor, amplifier, controller, and actuator have high responses.
- Non-contact detecting system.
- Very easy installation and maintenance.
- All variety of sensors are available according to the application.
- The remote control head and/or the centering sensor further simplifies operation.(option)
System Components
The Servoguide MK-IV. M is composed of a sensor, amplifier, controller, work cylinder, and a guide roll or reel stand. This system can be applied to a wide range of objects with the various sensors available.
Specifications
MODEL | Type | Max operating pressure Mpa | Pump capacity L/min | Pump type | Motor Output W | Max. operating force kN Cylinder bore mm | Max. operating speed with no load mm/s Cylinder bore mm | |||
---|---|---|---|---|---|---|---|---|---|---|
50 | 80 | 50 | 80 | |||||||
M121-AM | Single standard | 1.5 | 4.2 | Fix displacement | 400 | 2.9 | 7.4 | 34 | 13 | |
M220-AM | Twin standard | 1.3 | 9(60Hz) | No load | Variable | 750 | 2.9 | 7.4 | 34 | 13 |
7.5(50Hz) | ||||||||||
M721-AM | High load | 2.5 | 9(60Hz) | No load | Variable | 750 | - | 12.3 | - | 30 |
7.5(50Hz) | ||||||||||
M550-AM | High pressure / high resolution type |
5 | 9(60Hz) | No load | Variable | 1500 | - | 24.6 | - | 60 |
7.5(50Hz) | ||||||||||
M810-AM | High output type | 5 | 12.5(60Hz) | No load | Variable | 1500 | - | 24.6 | - | 60 |
10.5(50Hz) |