
Products Information
-
Edge Position Control Systems
(Sensors)- Design Position Control DPC
- LINE FOLLOWER HEAD LH500
- LINE FOLLOWER HEAD LH110
- LINE FOLLOWER HEAD LH19
- PHOTOHEAD PH30 / PH31
- CMOS Linear Sensor SLH30
- Ultrasonic Autowide Sensor
UHW500 / 700 - Ultrasonic Autowide Sensor UHW280
- Ultrasonic Autowide Sensor UHW051
- ULTRASONIC SENSOR UH01 series
- PHOTOHEAD PH22
- PHOTOHEAD PH16B / PH21
-
Edge Position Control Systems
(Electric type)- Motor-Driven Actuator K50 K50/A
- Compact Guide Roll Mechanism LCD series
- Guide Roll Mechanism
- Motor-Driven Actuator A352
- Motor-Driven Actuator A151
- Motor-Driven Actuator A031
- Motor-Driven Actuator K80
- Motor-Driven Actuator K62 K62/A
- Motor-Driven Actuator K12 series
- Liteguide Amplifier AE61 series
- Litegude Amplifier AE120series
- Liteguide Controller AE1000
- Liteguide Controller AE500
-
Edge Position Control Systems
(Hydraulic type) -
Tension Control Systems
- Other related equipment
- Electro-Pneumatic Converter EN40
- MC Tension Sensor
- MG Tension Sensor
- MB Tension Sensor
- CJ Tension Sensor
- MJ Tension Sensor
- TSA Tension Sensor
- Open loop Tension Control System TCD050
- Open loop Tension Control System TCD030
- Tension Meter TM310T
- Tension Meter TM340
- Tension Controller TC680A/D
- Tension Controller TC920V
-
Automaic Register Control Systems
-
Print-to-cut Register Control Systems
-
Other Related Equipment

NIRECO CORPORATION
2951-4 Ishikawa-machi, Hachioji-shi, Tokyo 192-8522, Japan
[TEL]+81-42-642-3111
[FAX]+81-42-644-5815
[Business Overview]
Process control
Web control
Inspection systems
2951-4 Ishikawa-machi, Hachioji-shi, Tokyo 192-8522, Japan
[TEL]+81-42-642-3111
[FAX]+81-42-644-5815
[Business Overview]
Process control
Web control
Inspection systems
Web Control Systems
Edge Position Control Systems(Electric type)
Edge Position Control Systems(Electric type)
Motor-Driven Actuator A031
Overview
The Motor-Driven Actuator A031 is connected to an SP-151 AC servo driver unit and is used primarily in EPC systems. Direct-acting electric actuators are solidly built, with an integrated speed-reduction gear (planetary gear) and ball screw, which minimizes gear backlash.
Specifications
Model | Stroke mm | Speed mm/s | Permissible thrust N | Mass kg |
---|---|---|---|---|
A031-80-20 | 80 | 22.5* | 300 | 3.2 |
A031-150-20 | 150 | 3.7 |
* NOTE : Speeds shown are when unloaded.